Mk3+ Upgrade Kit

Mk3+ Upgrade Kit

$999.00

MK3 Plus Upgrade Set – EtherCAT Brake Edition

Complete upgrade package for Motion4Sim systems to support EtherCAT servo drives with integrated brake control. Includes Motion4Safe Power Distribution Box (self-assembly kit), PRO+ license upgrade, brake breakout PCBs, professional network integration, and structural mounting components.

Designed for clean installation, structured 24V brake power distribution, and reliable EtherCAT communication in 6–7 axis motion platforms.

Servo driver and motor not included.
This offer is valid only in combination with the purchase of an MK3 rig.

Available on backorder

Category:

MK3 Plus Upgrade SET

Professional Upgrade Package for Motion4Sim Systems with EtherCAT Brake Support

for Servo driver + motor (not included)

  • 1 x A6-750EC: 750-W-EtherCAT-AC-Servomotortreiber
  • 1 x A6M80-750H2B1-M17: 750W AC-Servomotor 3000rpm, 2,39Nm mit Bremse, 17-Bit-Encoder IP67

This upgrade enables the use of EtherCAT servo drives with integrated brake control and provides a clean, professional, and service-friendly system layout.

✅ Motion4Safe Power Distribution Box included
✅ Upgrade for EtherCAT servos with brake functionality
✅ Professional panel and network integration

This offer is valid only in combination with the purchase of an MK3 rig.

🔑 Included License

  • Motion4Sim Controller PRO+ Upgrade License
    Enables PRO+ functionality for use with EtherCAT and the Motion4Sim Controller.

📦 Included Hardware Components

🔌 Power & Distribution

  • Motion4Safe Power Distribution Box (included) as Kit for self assembling
    Integrated AC filtering, circuit protection, energy monitoring, 12V & 24V DC supply, and emergency stop functionality.
    -> Click for more Info

  • 3D-printed power distribution housing with DIN rail and mounting screws for the rig

  • SP16 connector (for soldering to cable)

  • 8m supply cable 4×0.75 mm² (12V + 24V)

  • DC plug 5.5 × 2.1 mm for Motion4Sim controller

  • 90° DC socket adapter extension cable

🖥 Controller & Structural Parts

  • Motion4Sim Controller PRO+ Upgrade

  • Sheet metal cover with logo (instead old cut-out version)

  • Side cover panel with logo (instead of old Powerswitch in the Rig)

  • 3D-printed holder for network and power cables (2× M20 cable clamps and RJ45 socket)

  • Structural revision replacing old power switch layout

🌐 Network & Communication

  • CAT6A RJ45 panel-mount network module

  • 8× CAT7 EtherCAT cables (50 cm)

  • used for pc telemetry comunication

⚙ Servo Driver & Brake Integration

  • 6× 2 mm thick adapter plates for servo driver mounting

  • Nut and washer sets for adapter plates

  • 6× Brake Servo Driver Breakout PCBs

  • 12× 4-40 UNC × 3/16 screws

  • 18 sets JST 5557 connectors with pins for 24V DC brake power supply

🚀 Purpose of the MK3 Plus Upgrade

This kit upgrades existing systems to:

  • Support EtherCAT servo drives with brake control

  • Provide structured 24V brake power distribution

  • Enable professional EtherCAT networking

  • Improve internal wiring layout

  • Modernize enclosure design

  • Integrate Motion4Safe power management

🎯 Designed For

  • Existing Motion4Sim owners upgrading to MK3+

  • 6–7 axis motion platforms

  • EtherCAT-based servo systems with brake functionality

  • Professional simulator builders

Weight 1 kg

Related products