In these instructions we briefly describe how you can quickly put the controller into operation. For the first test, please use the motors without a connected load. Please be aware of the risk of injury if you use the motors…
1. Introduction to 6-DOF Motion Cueing A 6-DOF (Degrees of Freedom) Stewart platform system simulates movement in six degrees of freedom: Motion simulation is based on motion cueing, a technique that creates realistic movement sensations by carefully combining high-pass, low-pass,…
The Motion4Sim Controller has an Ethernet interface starting from PCB version 2.03. This allows it to connect to a regular LAN network via Ethernet. For the connection and setup, a standard Cat 5e patch cable or better can be used.…
In this article, I will demonstrate how various button boxes can be used with the Motion4Sim controller. There is our in-house button box with online switch or push button and emergency switch. Additionally, there are also button boxes from competitors…
