In this post, I will demonstrate how to use and setup the Torque Mode of the AASD servos to operate a belt tensioner, such as the one used by Flag Ghost, for example.The thanos controller, as well as the m4s…
Board and Connectors There are several hardware versions that are compatible and operated with the same firmware. Version 1.04 with SAME70 xpld Board and breakout board for the interfaces Fig.1. Version 1.05 with ATSAME70 MCU with FTDI or CH340 USB…
The new PCB design can be seen in the following image. The numbers in the image indicate the various components, connectors, and pin headers. These will be explained subsequently. Designators for Front Side 1. USB Connector Type C2. Connector Dsub25…
